Blakeslee UC-20 Bedienungsanleitung Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
10
DETERGENT
Use a low-suds, good commercial grade detergent. Never use a foaming soap or soap flakes. Your
local detergent representative knows the capabilities of their detergents and can determine the proper
treatment of your water for proper use with the manufacture’s product. The wash water must be kept at
an effective strength to obtain good washing results. Ask your local detergent supplier for their advice.
OPERATING THE DISHWASHER
Once the wash tank is filled and the dishwasher is properly loaded, choose a cycle mode per the following
instructions:
1. Use the up/down arrows on the Select Cycle Key to choose the desired ware-washing cycle. The
choices are: Economy (default), Economy Plus, Glassware, Flatware, Dishware, Pots and Pans,
and Programmable.
2. “HEATING UP WATER”. The indicator light is red and the wash cycle cannot start until the
dishwasher reaches the required temperature. An exception to waiting period is the Economy cycle;
in which, the wash cycle can be started regardless of water temperatures.
3. When proper temperatures are reached, a green indicator light appears and the dishwasher is
ready for a washing cycle. To start the washing cycle, press the Start/Enter switch.
4. At the beginning of the wash cycle, a detergent pump will systematically add detergent into the
wash tank.
5. At the end of the wash cycle, a blue indicator light appears. The final rinse is now in process. The
dishwasher will perform a slight draining operation prior to the final rinse cycle. Towards the end of
the rinse cycle, a rinse aid will automatically inject the additive into the final rinse water line.
6. Operation is complete when the blue indicator light turns off.
7. The dishwasher is ready for the next loading session.
NOTE: It is important to check and clean the strainer when prompted to do so.
A “CLEAN STRAINER” prompt will appear after:
a. Several loads have been washed in the same washing mode.
b. Washing mode has been changed (e.g. changing from a dishware mode to a flatware mode).
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare