Blakeslee UC-20 Bedienungsanleitung PDF herunterladen (Seite 4)

WARNING: Before performing any service that involves electrical connection or disconnection

and/or exposure to electrical components, always perform the Electrical

LOCKOUT/TAGOUT Procedure. Disconnect all circuits. Failure to comply with this

procedure can cause property damage, injury or death.

WARNING: Before removing any sheet metal panels, always perform the Electrical

LOCKOUT/TAGOUT Procedure. Be sure all circuits are disconnected. Failure to

comply with this procedure can cause property damage, injury or death.

WARNING: Do not operate this equipment without properly placing and securing all covers and

access panels. Failure to comply with this procedure can cause property damage,

injury or death.

WARNING: Do not use or store gasoline or other flammable vapors or liquids in the vicinity of this

or any other appliance. Failure to comply can cause property damage, injury or death.

WARNING: In the event of a power failure, do not attempt to operate this appliance. Failure to

comply can cause property damage, injury or death.

ELECTRICAL LOCKOUT/TAGOUT PROCEDURE

WARNING:

Before performing any service that involves electrical connection or disconnection and/or

exposure to electrical components, always follow the Electrical LOCKOUT/TAGOUT Procedure.

Disconnect all circuits. Failure to comply with this procedure can cause property damage, injury

or death.

The Electrical LOCKOUT/TAGOUT Procedure is used to protect personnel working on an electrical

appliance. Before performing any maintenance or service that requires exposure to electrical

components, follow these steps:

1. In electrical box, place appliance circuit breaker into OFF position.

2. Place a lock or other device on electrical box cover to prevent someone from placing circuit

breaker ON.

3. Place a tag on electrical box cover to indicate that appliance has been disconnected for service

and power should not be restored until tag is removed by maintenance personnel.

4. Disconnect appliance power cord from electrical outlet.

5. Place a tag on the cord to indicate that unit has been disconnected for service and power should

not be restored until tag is removed by maintenance personnel.

1 2 3 4 5 6 7 8 9 ... 31 32

Keine Kommentare

Blakeslee UC-20 Bedienungsanleitung Seite 4